Hydrogen on Colloidal Gold Nanoparticles.

Colloidal gold nanoparticles (AuNPs) have myriad scientific and technological applications, but their fundamental redox chemistry is underexplored. Reported here are titration studies of oxidation and reduction reactions of aqueous AuNP colloids, which show that the AuNPs bind substantial hydrogen (electrons + protons) under mild conditions. The 5 nm AuNPs are reduced to a similar extent with reductants from borohydrides to H2 and are reoxidized back essentially to their original state by oxidants, including O2. The reactions were monitored via surface plasmon resonance (SPR) optical absorption, which was shown to be much more sensitive to surface H than to changes in solution conditions. Reductions with H2 occurred without pH changes, demonstrating that hydrogenation forms surface H rather than releasing H+. Computational studies suggested that an SPR blueshift was expected for H atom addition, while just electron addition likely would have caused a redshift. Titrations consistently showed a maximum redox change of the 5 nm NPs, independent of the reagent, corresponding to 9% of the total gold or ∼30% hydrogen surface coverage (∼370 H per AuNP). Larger AuNPs showed smaller maximum fractional surface coverages. We conclude that H binds to the edge, corner, and defect sites of the AuNPs, which explains the stoichiometric limitation and the size effect. The finding of substantial and stable hydrogen on the AuNP surface under mild reducing conditions has potential implications for various applications of AuNPs in reducing environments, from catalysis to biomedicine. This finding contrasts with the behavior of bulk gold and with the typical electron-focused perspective in this field.

Endergonic Hydrogenation at Ambient Conditions Using an Electrochemical Membrane Reactor.

Here, we determine how the hydrogen loading (x) of an electrochemical palladium membrane reactor (ePMR) varies with electrochemical conditions (e.g., applied current density, electrolyte concentration). We detail how x influences the thermodynamic driving force of an ePMR. These studies are accomplished by measuring the fugacity (P) of hydrogen desorbing from the palladium-hydrogen membrane and subsequently relating P to pressure-composition isotherms to determine x. We find that x increases with both applied current density and electrolyte concentration, but plateaus at a loading of x ≅ 0.92 in 1.0 M H2SO4 at -200 mA·cm-2. The validity of the fugacity measurements is supported experimentally and computationally by: (a) electrochemical hydrogen permeation studies; and (b) a palladium-hydrogen porous flow finite element analysis (FEA) model. Both (a) and (b) agree with the fugacity measurements on the following x-dependent properties of the palladium-hydrogen system during electrolysis: (i) the onset for spontaneous hydrogen desorption; (ii) the point of steady-state hydrogen loading; and (iii) the function describing hydrogen desorption between (i) and (ii). We proceed to detail how x defines the free energy of palladium-hydrogen alloy formation (ΔG(x)PdH), which is a descriptor for the thermodynamic driving force of hydrogenation at the PdHx surface of an ePMR. A maximum value ΔGPdH of 11 kJ·mol-1 is observed, suggesting that an ePMR is capable of driving endergonic hydrogenation reactions. We empirically demonstrate this capability by reducing carbon dioxide to formate (ΔGCO2/HCO2H = 3.4 kJ·mol-1) at ambient conditions and neutral pH.

Bioelectrocatalysis with a palladium membrane reactor.

Enzyme catalysis is used to generate approximately 50,000 tons of value-added chemical products per year. Nearly a quarter of this production requires a stoichiometric cofactor such as NAD+/NADH. Given that NADH is expensive, it would be beneficial to regenerate it in a way that does not interfere with the enzymatic reaction. Water electrolysis could provide the proton and electron equivalent necessary to electrocatalytically convert NAD+ to NADH. However, this form of electrocatalytic NADH regeneration is challenged by the formation of inactive NAD2 dimers, the use of high overpotentials or mediators, and the long-term electrochemical instability of the enzyme during electrolysis. Here, we show a means of overcoming these challenges by using a bioelectrocatalytic palladium membrane reactor for electrochemical NADH regeneration from NAD+. This achievement is possible because the membrane reactor regenerates NADH through reaction of hydride with NAD+ in a compartment separated from the electrolysis compartment by a hydrogen-permselective Pd membrane. This separation of the enzymatic and electrolytic processes bypasses radical-induced NAD+ degradation and enables the operator to optimize conditions for the enzymatic reaction independent of the water electrolysis. This architecture, which mechanistic studies reveal utilizes hydride sourced from water, provides an opportunity for enzyme catalysis to be driven by clean electricity where the major waste product is oxygen gas.

Quantification of the Effect of an External Magnetic Field on Water Oxidation with Cobalt Oxide Anodes.

Here, we quantify the effect of an external magnetic field (ß) on the oxygen evolution reaction (OER) for a cobalt oxide|fluorine-doped tin oxide coated glass (CoOx|FTO) anode. A bespoke apparatus enables us to precisely determine the relationship between magnetic flux density (ß) and OER activity at the surface of a CoOx|FTO anode. The apparatus includes a strong NdFeB magnet (ßmax = 450 ± 1 mT) capable of producing a magnetic field of 371 ± 1 mT at the surface of the anode. The distance between the magnet and the anode surface is controlled by a linear actuator, enabling submillimeter distance positioning of the magnet relative to the anode surface. We couple this apparatus with a finite element analysis magnetic model that was validated by Hall probe measurements to determine the value of ß at the anode surface. At the largest tested magnetic field strength of ß = 371 ± 1 mT, a 4.7% increase in current at 1.5 V vs the normal hydrogen electrode (NHE) and a change in the Tafel slope of 14.5 mV/dec were observed. We demonstrate through a series of OER measurements at sequential values of ß that the enhancement consists of two distinct regions. The possible use of this effect to improve the energy efficiency of commercial water electrolyzers is discussed, and major challenges pertaining to the accurate measurement of the phenomenon are demonstrated.

Electrolysis Can Be Used to Resolve Hydrogenation Pathways at Palladium Surfaces in a Membrane Reactor.

For common hydrogenation chemistries that occur at high temperatures (where H2 is adsorbed and activated at the same surface which the substrate must also adsorb for reaction), there is often little consensus on how the reactions (e.g., hydro(deoxy)genation) actually occur. We demonstrate here that an electrocatalytic palladium membrane reactor (ePMR) can be used to study hydrogenation reaction mechanisms at ambient temperatures, where the catalyst does not necessarily undergo structural reorganization. The ePMR uses electrolysis and a hydrogen-selective palladium membrane to deliver reactive hydrogen to a catalyst surface in an adjacent compartment for reaction with an organic substrate. This process forms the requisite metal-hydride surface for hydrogenation chemistry, but at ambient temperature and pressure, and without a H2 source. We demonstrate the utility of this analytical tool by studying the hydrogenation of benzaldehyde at palladium nanocubes with dimensions of 13-24 nm. This experimental design enabled us to resolve that the alcohol product forms at the facial sites, whereas the hydrodeoxygenation step occurs at edge sites. These observations enabled us to develop the first site-specific definition of how a carbonyl species undergoes hydro(deoxy)genation.

Physical Separation of H2 Activation from Hydrogenation Chemistry Reveals the Specific Role of Secondary Metal Catalysts.

An electrocatalytic palladium membrane reactor (ePMR) uses electricity and water to drive hydrogenation without H2 gas. The device contains a palladium membrane to physically separate the formation of reactive hydrogen atoms from hydrogenation of the unsaturated organic substrate. This separation provides an opportunity to independently measure the hydrogenation reaction at a surface without any competing H2 activation or proton reduction chemistry. We took advantage of this feature to test how different metal catalysts coated on the palladium membrane affect the rates of hydrogenation of C=O and C=C bonds. Hydrogenation occurs at the secondary metal catalyst and not the underlying palladium membrane. These secondary catalysts also serve to accelerate the reaction and draw a higher flux of hydrogen through the membrane. These results reveal insights into hydrogenation chemistry that would be challenging using thermal or electrochemical hydrogenation experiments.

Efficient Electrocatalytic Hydrogenation with a Palladium Membrane Reactor.

We report here the benefits of using a palladium membrane reactor to drive hydrogenation chemistry with electricity while bypassing the formation of gaseous H2. This technique uses a palladium membrane to physically separate the electrochemical and hydrogenation chemistry. As a result, hydrogenation can be performed electrochemically with protons but in any organic solvent. In this article, we outline a series of experiments showing how hydrogenation in the palladium membrane reactor proceeds at faster reaction rates and with much higher voltage efficiency than hydrogenation at an electrode. Moreover, the organic reaction chemistry in the membrane reactor can be performed in organic solvents and without contamination by electrolytes. The physical separation of the hydrogenation compartment from the electrolysis compartment therefore broadens the scope of electrolytically-driven reactions that are available, and simplifies reagent handling and purification.

Opto-Spintronics: Photoisomerization-Induced Spin State Switching at 300 K in Photochrome Cobalt-Dioxolene Thin Films.

Controllable quantum systems are under active investigation for quantum computing, secure information processing, and nonvolatile memory. The optical manipulation of spin quantum states provides an important strategy for quantum control with both temporal and spatial resolution. Challenges in increasing the lifetime of photoinduced magnetic states at T > 200 K have hindered progress toward utilizing photomagnetic materials in quantum device architectures. Here we demonstrate reversible light-induced magnetization switching in an organic thin film at device operating temperatures of 300-330 K. By utilizing photochromic ligands that undergo structural changes in the solid state, the changes in ligand field associated with photoisomerization modulate the ligand field and in turn the oxidation and spin state of a bound metal center. Green light irradiation (λexc = 550 nm) of a spirooxazine cobalt-dioxolene complex induces photoisomerization of the ligand that in turn triggers a reversible intramolecular charge-transfer coupled spin-transition process at the cobalt center. The generation of photomagnetic states through conversion between a low-spin Co(III)-semiquinone doublet and a high-spin Co(II)-bis-semiquinone sextet state has been demonstrated in both solution and the solid state and is described as a photoisomerization-induced spin-charge excited state (PISCES) process. The high transition temperature (325 K) and long-lived photoinduced state (τ = 10 s at 300 K) are dictated by the photochromic ligand. Theory provides effective modeling of the phenomenon and long-term strategies to further modulate the lifetimes of photomagnetic states for quantum information technologies at the single molecule level.

Ultrafast Spintronics: Dynamics of the Photoisomerization-Induced Spin-Charge Excited-State (PISCES) Mechanism in Spirooxazine-Based Photomagnetic Materials.

The optical control of spin state is of interest in the development of spintronic materials for data processing and storage technologies. Photomagnetic effects at the single-molecule level have recently been observed in the thin film state at 300 K in photochromic cobalt dioxolenes. Visible light excitation leads to ring-closure of a photochromic spirooxazine bound to a cobalt dioxolene, which leads to generation of a high magnetization state. Formation of the photomagnetic state occurs through a photoisomerization-induced spin-charge excited-state process and is dictated by the spirooxazine ligand dynamics. Here, we report a mechanistic investigation by ultrafast spectroscopy in the UV-vis region of the photochemical ring-closing process in the parent spirooxazine, azahomoadamantylphenanthroline spirooxazine, and the photomagnetic spirooxazine cobalt-dioxolene complex. The cobalt appears to stabilize a photomerocycanine transient intermediate, presumably the TCC isomer, formed along the ground-state potential energy surface (PES). Structural changes associated with the TCC isomer induces formation of the high-spin Co(II) form, suggesting that magnetization dymanics can occur along the excited-state PES, leading to ultrafast switching on the ps time scale. We demonstrate the full ring closure of the spiro-oxazine ligand is not required to switch magnetization states which can be induced with a higher yielding isomerization reaction. The ability of this system to undergo optically induced spin state switching on the ps time scale in the solid state makes it a promising canididate for resistive nonvolatile memory technologies.

Visible light photoswitching of conjugated polymer nanoparticle fluorescence.

Conjugated polymer nanoparticles doped with a reverse photochromic dye exhibit highly quenched fluorescence that can be reversibly activated by controlling the form of the photochrome with visible light.